Palm Oil Refineries

SWTS successfully implemented sustainable palm oil mill power management solution










thumbnail of Aumkar oil mill case study

  • Below are some of the benefits from the retrofit project;
  • - Utilization of biomass for power generation
  • - Automating processes, reducing human errors
  • - Remote monitoring, able to monitor from city headquarter
  • - Increasing productivity, due to stable synchronization during production
  • - Reducing cost of production, as less raw material is required for power generation, reduce reliance from Grid power
  • - Extra revenue, possible tie up to grid for stable power exportation, sale of kernel shells saved from power generation

This successful implementation has indirectly allowed zero discharge from palm oil production, providing an efficient and sustainable operation. We believe the solution to enable sustainable palm oil productivity.

Dean Lim

+65 96259024

Difference between ”Tenera” and ”AA Hybrida IS” breeds


I am a Nigerian from the south west, tropical region, rainforest zone, Nigeria who wants to go into Palm oil farming. In Nigeria I am only familiar with ”Tenera breed”. The ”AA Hybrida 1S” breed is new to me, the following are my questions;

(1) Is this breed ”AA Hybrida 1S” a better breed compared to ”Tenera” breed?

(2) What about the quality and quantity of Palm kernel oil produced from ”AA Hybrida 1S” compared to that of ”Tenera” breed?

(3) Would the ”AA Hybrida 1S” breed grow well in the south west, tropical region, rainforest zone in Nigeria?

(4) What is the maturity time for the seed in the nursery in case I buy the seeds from you?

(5) What is the maturity time for the nursed seeds after transplanting to the field?

(6) What is the cost of the seeds?

(7) What is the life span of the ”AA Hybrida 1S” breed?

(8) Is it advisable to abort its fruits of the ”AA Hybrida 1S” breed at the early stage?

(9) What is the normal height of the ”AA Hybrida 1S” breed tree at full maturity?

Thank you,



Biogas Capturing System


One of the by-products of anaerobic digestion process is biogas or often called as methane gas because of its high content in volume. This gas can be used for energy generation. We provide advice and solution on biogas engineering and energy management. Our company has technical collaboration with Chiang Mai University – Energy Research Development Institute, Thailand (CMU-ERDI) which has more than 20 years of experience in biogas technology. CMU-ERDI’s project reference is extensive with over 1000 project setups spanning various industries such as palm oil mill, livestock farms, slaughterhouse, industrial and agricultural factories. We also offer a complete BIOGAS FLARE and BIOGAS BURNER SYSTEM with safety aspects to suit our client’s needs.


  • High COD removal.
  • Long life time (>15 years).
  • Higher agitation efficiency with simple pumping circulation and flow distribution and bubbling through pipe nozzles. No blockages.
  • Simple mixing devices. Mixing is based on several unit pumps.
  • All mechanical parts are placed external for easy service and maintenance. Low maintenance costs.
  • Effective biogas production with high wastewater treatment capability.
  • Low construction and operation cost.




  • Suitable for wastewater with high suspended solid.
  • Easy maintenance.
  • High efficiency due to high chance of contact between microbial and organic matters.

download (1)



  • Flare Tip Assembly
  • Fire Control Equipment such as Flame Arrester
  • PLC Control Panel (weather proof)
  • Ignition system
  • Control valves
  • Moisture Separator
  • Pressure Measurement Equipment
  • Temperature sensor


  • Buner assembly
  • Fire Control Equipment such as Flame Arrestor, Flame sensor
  • PLC Control Panel
  • Gas Train from U seal to Burner
  • Combustion Blower Assembly
  • Control Valves
  • Pressure Measurement Equipment such as Pressure gauge, Transmitter
  • Moisture Separator


Kibaran Logo2 KIBARAN TERNAMA SDN. BHD. (A Subsidiary of Sakti Suria (M) Sdn. Bhd.)

Puchong Office – HQ:

No.17 & 19, Jln TPP 5/13, Taman Perindustrian Puchong, Seksyen 5, 47100 Puchong, Selangor D.E., Malaysia.

Tel: (603) 8061 6868, Fax: (603) 8061 7033


Allen Gwynnes Nimbus End Suction Pump




– A back pull design for easy maintenance or replacement.
– Alternative bearing bracket mounting arrangement – to suit various discharge position.
– Unique design of the gland cover for quick & easy installation.



Allen Gwynnes Pump

AGP.AGL . new 2015   AGP

RPS TRADERS was incorporated on 10th Jun 2011 under the company Act 1965. Malaysia
We have been active in the field of Palm Oil Mill, Oleo Chemical Industry, Water Supply & Waste Water, Pulp & Paper Mill and other general industries. Our main products are ALLEN GWYNNES (UK) Centrifugal Pump, Watt-Eurodrive (Europe) Gearboxes , SEW-EURODRIVE (GERMANY) Gear Reducer, , GSD Mixer , Galaxy Sivtek (India) Vibrating Screen , SIHI (GERMANY) Multistage Pump, EMNIN Magnets, ENMIN (AUS) Vibrating Feeder, GOLDEN Mesh and Circular Vibrating Screen.
RPS TRADERS has recorded consistent growth in developing its products and management. We are firmly committed to supply high quality products at competitive prices with good service.
As well as expanding our existing products range, our company has also diversified into process control and instrumentation business.
We have experience and good working relationship with engineering consultants, designers, specifiers, contractors, fabricators, manufacturing companies and governmental authorities in the various fields we are in. Some of our major customers were Sime Darby, KL Kepong, Felcra Berhad, Felda Holdings, IOI Group, Ramly Food Processing, and many others.

The company is well equipped with technical, commercial and financial resources to explore, develop and grow our business with good support from Kuala Lumpur office. The management team is academically and technical qualified to distribute and service technically orientated products to meet the needs of industries.

We would also like to take this opportunity to let you have information on some of our other products which you may find useful at some stage in the future. If you require further assistance or need any other details please feel free to contact us.

Thanks you!

Best regards,
Poon Chee Peng
H/P: +6012-234 5415